Head of Department


Prof. Madhura P. Mahajan (View Profile)

Welcome to the Department of Printing Engineering

The department was established in the year 1985 by our Founder, Principal and Director Dr. Pa. Bha. Kulkarni. Started as a small department with strength of 30 students has now a developed into a flourished department with 30 batches passed out till date. The curriculum covers all aspects of graphic design, print media and packaging along with interdisciplinary courses like computer, mechanical, electrical, electronics and information technology.

Strength of Print: Tangible and Engaging

We cannot imagine a world without Print and Packaging. From the time we rise till the time we sleep we are continuously using on an average 240 printed products. Our students in this programme of engineering comprehend the science and technology that produces this print and also develop innovative print products and mechanisms useful for the Printing Industry. Companies visiting the campus for recruitment are Hindustan Times, Tetra Pak, Repro India, Parksons Packaging Delta Printing Press, Dubai etc.

Department of Printing Engineering

Printing engineering department established in the year 1985 with undergraduate course. The Department has sanctioned intake of 60 students.  Though it is one of the youngest departments in the institute it has qualified, experienced and dedicated teaching staff. Department emphasizes on effective teaching learning process with excellent teaching learning environment.  There are total  08 Teaching Staff and 09 non Teaching staff. Department has 6 well equipped laboratories, with Pre Press, Press, Post press and internet facility in each laboratory as per the requirements of SPPU and AICTE

Vision

To excel in quality education with emphasis on research, professional ethics and environmental sustainability to meet the challenges of the emerging techno commercial needs of printing and packaging industry.

Mission

  • To develop state of the art infrastructure to create competitive engineers for the printing `industry.
  • To develop a strong bond between industry and institute to promote training and consultancy activities in printing.
  • To motivate students and scholars inculcate research culture in printing.
  • To develop knowledge and skill in students to adapt to the competitive and technical environment in printing industry.
  • To nurture the spirit of environmental sustainability and excellent work culture among students required in the industry.

Program Educational Objectives

  • PEO 1: The printing engineering graduates in their chosen field of prepress, color and design, print, converting shall be adaptive to the dynamic changes happening in the related industry.
  • PEO 2: The printing engineering graduates either in their employment or business shall try to implement integrated business processes keeping a strong focus on customer satisfaction.
  • PEO 3: The printing engineering graduate shall focus on green printing that includes saving in energy and resources in print processes by way of carbon footprint reduction initiatives.
  • PEO 4: To prepare print graduate to undertake higher studies so as to become ‘enablers’ in researching new upcoming fields of printing and packaging
  • PEO 5: The printing engineering graduate shall be able to develop new systems for minimizing costs, wastage and increase productivity in the field of commercial printing, publications, packaging and allied media.

Program Outcomes

  • The graduate shall be able to apply the engineering knowledge that includes fundamental physics, chemistry and mathematics for problem solving in printing engineering.
  • The graduate shall be able to identify and formulate research problems in the field of printing and packaging by reviewing literature and solving it using basic principles of mathematics, statistics and sciences.
  • The graduate shall be able to solve challenges related to health, environment and safety in printing and packaging field realizing their responsibility to society.
  • The graduate shall be able to investigate problems in the field of printing and materials by implementing research methods such as design of experiments and analytical tools to interpret the data.
  • The graduate shall try to develop solutions to solve complex problems in the field of ink, substrate, printing and packaging processes.
  • The graduate shall be able to evaluate and solve issues related to quality of any printed product conforming to industry requirements and standards of both national and international.
  • The graduate shall demonstrate knowledge in areas of designing and prepress areas for the purpose of error-free solutions during printing.
  • The graduate shall effectively carry out calibration, operation and maintenance of machines and equipments used in printing and packaging industry.
  • The graduate shall understand working of mechanical, electrical and electronic components used in various printing and packaging machines and equipments.
  • The graduate shall demonstrate managerial skills, individual skills and team spirit in operations carried out in printing, packaging and converting industry.
  • The graduate shall be able to evaluate critically the implications of wrong practices that cause serious environmental problems and develop products that lead to greater sustainability.
  • The graduate shall follow ethics in his/her professional and research field and thus remain committed to the responsibilities of an engineer.

Doctorate in Printing Engineering

The Printing Engineering Department of COET is approved as a ‘Post Graduate Research Center in Printing Engineering’ by Savitribai Phule Pune University since July 2012.

List of Ph.D Guides and Ph.D candidates at the research Center

Name of Guide Area of Research Name/s of Ph.D. Candidate/s Ph.D. Work Status
Prof. Dr. Y. P. Nerkar Printing Mrs. Shilpa S Anchawale Pursuing
Prof. Dr. M. M. Bhoomkar Printing Mr.Sameer M. Prabhune Pursuing
Dr. Akshay V. Joshi Printing Mrs. Laxmi Sapkal Registered

Details of the Ph.D. candidates at the Research Center

Name of the Candidate Research Area Name of Guide Status
Mrs. Shilpa S Anchawale Formulations of Water based Inks from modified resin for flexo printing and it’s evaluation of printability properties on non absorbent substrates. Prof. Dr. Y. P. Nerkar Pursuing Ph.D.
Mr.Sameer M. Prabhune Development of Cost Effective Printed Corrugated Cartons Prof. Dr. M. M. Bhoomkar Pursuing Ph.D.

Post Graduate in Printing Engineering

Name of PG Guide Total No. of PG Students guided
Completed Pursuing
Dr. Y.P. Nerkar 03 01-Ph.D.
Dr. M. M. Bhoomkar 09 01, 01-Ph.D.
Dr. A. V. Joshi 04 01-Ph.D. registered
Prof. Mrs. M..P. Mahajan 01 06
Prof. Mrs. P. A. Joshi 00 01
Prof. A. R. Mahajan 03 00
Details of M.E. Students in last past five years
Year No. of Students Admitted No. of Students Completed
2019-20 00 03 appearing
2018-19 02 00
2017-18 03 00
2016-17 03 03
2015-16 04 00
2014-15 03 02
2013-14 05 04
2012-13 03 02

Faculty

Sr. No. Name of Faculty Designation Qualification Years of Experience
1. Prof. Mrs. Madhura P. Mahajan Head of Department Ph.D. (Pursuing) ME Printing 25
2. Dr. Akshay Joshi Assistant Professor Ph.D. ME Printing 25
3. Prof. Abhinay R. Mahajan Assistant Professor ME Printing M.S. (Paper Engg. & Imaging Science, USA) 24
4. Prof. Mrs. Padmaja Joshi Assistant Professor ME Printing 26
5. Prof. Laxmi Sapkal Assistant Professor ME Printing 11

Faculty Activities

Teachers attending professional development programs, viz., Orientation program, Refresher Course, Short Term Course, Faculty Development Program during last five years
S.No. Title of the Professional Development Program Name of Teaching Staff Total Number of Teachers who Attended Duration:    From -To
Year  2019-20
1 FAQ on Flexo Anilox, Ink-Water Balance, Paper Boards from  Pressman E- Learning and Tech Talk Dr. Akshay V. Joshi 01 31st May 2020
2 Ink Room Optimization and dispensing System by Pressman Academy for Print Education and Research Dr. Akshay V. Joshi 01 29th May 2020
3 Webinar on “A great debate on bringing sustainability and innovation in food packaging post lockdown 4.0” Prof. P.A. Joshi 01 22 May 2020
4 “Effective and efficient online teaching in the age of corona: A hands on workshop” Prof. P.A. Joshi 01 16 May 2020
5 Industry 4.0 - Automation in Color by Pressman Academy for Print Education and Research Dr. Akshay V. Joshi 01 15th May 2020
6 Correlation of paperboard properties with Print requirements by Pressman Academy for Print Education and Research Dr. Akshay V. Joshi 01 6th May 2020
7 Professional course on “Biohacking your Brain’s health” Prof. P.A. Joshi 01 1 May-14 May 2020
8 Webinar on “leadership challenges during and after lockdown” Prof. P.A. Joshi 01 2 May 2020
9 Color Theory : Understanding the Number of Colors by X-rite PANTONE (Online Course) Prof. Mrs. Shrikala Kanade 01 30th April 2020 to 3rd May 2020
10 Role of ICC profiles from photoshop to printing machine by Pressman Academy for Print Education and Research Dr. Akshay V. Joshi 01 29th  April 2020
11 CxF technology-The most accurate way to measure spot colors by Pressman Academy for Print Education and Research Dr. Akshay V. Joshi 01 25th April 2020
12 Technical Writing (Online Course) By MIPT, Moscow Prof. Mrs. Shrikala Kanade 01 24th April 2020 to 22th May
13 Webinar on”3d printing with Stratasys” Prof. P.A. Joshi 01 24 April 2020
14 Techkon-Whats inside for its outside performance by Pressman Academy for Print Education and Research Dr. Akshay V. Joshi 01 16th April 2020
15 Idealliance- Why is the world moving towards one print specification by Idealliance South Asia Dr. Akshay V. Joshi 01 11th April 2020
16 Fundamentals of Project Planning and Management Dr. Akshay V. Joshi 01 4 weeks
17 Understanding Research Methods Dr. Akshay V. Joshi 01 4 weeks
18 Print Summit 2020 Prof. M.P. Mahajan, Prof .P.A. Joshi,Prof. L.D.Sapkal 03 23 January 2020
19 Print Summit 2020 organised by Bombay Master Printers Association Prof. Mrs. Madhura Mahajan   03 1 day
20 How leadership inspires Vision and Mission in day to day working organised by TCS Prof. Mrs. Madhura Mahajan   02 1 day
21 FDP on Arduino Uno by MKCL Prof. Mrs. Shrikala Kanade 01
22 G7 Expert Training Dr. Akshay V. Joshi 01 August 24 - 26, 2019
Year  2018-19
1 Print Summit 2019, organised by Bombay Master Printers Association Prof. Mrs. Madhura Mahajan Prof. A.R. Mahajan 02 1 day
2 Workshop on Screen Printing by Mr. Mike Young Prof. A.R. Mahajan Prof. P.A. Joshi 02 13 March 2019
Year  2017-18
1 Research Orientation Dr. Akshay V. Joshi 01 5th August 2017
2 Print Summit 2018, organised by Bombay Master Printers Association Prof. Mrs. Madhura Mahajan 01 1 day
Year  2016-17
1 Faculty Development Workshop on Patent Dr. Akshay V. Joshi Prof. Mrs. Madhura Mahajan Prof. A.R. Mahajan Prof. P. A. Joshi Prof. S. V. Kapare Prof. S. S. Anchawale Prof. L. D. Sapkal 07 3 - 4 February 2017
2 Workshop on HTML and story board writing Prof. P.A. Joshi 01 11 December 2016
3 ElitePlus Global Summit 2016 Dr. Akshay V. Joshi 01 21 - 22 September, 2016
4 International Pack Plus Conclave 2016 Dr. Akshay V. Joshi 01 July 29, 2016
5 IEEE 2 days workshop on “Solar Rooftop PV Generation and Net Metering Regulations” Prof. L.D.Sapkal 01 23, 24 November, 2017
Year 2015-16
1 DRUPA 2016, Düsseldorf, Germany Dr. Akshay V. Joshi, Prof. P. A. Joshi 01 31 May - 10 June 2016
2 FDP on ‘Use of ICT in Education for Online and Blended Learning”. FDP was conducted by IIT Bombay at Nodal Centre PVG’s College of Engineering & Technology Prof. Mrs. S. S. Anchawale and Prof. Mrs. L. D. Sapkal 02 2nd May 2016 to 10th July 2016
3 Workshop on Virtual Lab Development Prof. P. A. Joshi 01 June 2016
4 ISTE - Short Term Training Program On ‘Statistical Techniques for Data Analysis in Research’ Prof. Mrs. S. S. Anchawale 05 4th to 8th July 2016
Year 2014-15
1 Pamex 2015 Dr. Akshay V. Joshi 01 9th to 12th December 2015
2 Indo-French Conference – New Perspective on Color and Light, Jadavpur University, Kolkata Dr. Akshay V. Joshi 01 11 to 13 November 2015
3 Technical Report Writing using Latex Prof. L.D. Sapkal 01 5th -7th November 2015
4 Workshop on NBA report writing Prof. P. A. Joshi 01 2015
Year 2013-14
1 Workshop on Adobe CS5 by PPOA Prof. P. A. Josh 01 2013

Workshops / Training Programs / FDPs organized

Workshops
Sr. No. Title of the Workshop Duration Organizing Department No. of Participants Sponsored by
Faculty Student
1 Research paper presentation 17 May-30 May 2020 Printing 01 54 COPE, PVGCOET
2 Mentoring Activity 1June-15June 2020 Printing 08 180 PVGCOET
1 3D-Printing and Printed Electronics 1 Day 27th February, 2019 Printing Engineering 07 80 COPE
2 National Level “Adhesives used in Print and Packaging” 4 days June 11-14, 2018 Printing Engineering 03 20 Late V.G. Joshi Trust and PVG’s COET
3 Syllabus Revision: BE Printing 2015 Pattern 1 day, March 10, 2018 Printing Engineering 20 -- SPPU
4 Role of pigment and pigment dispersion in manufacturing of printing inks 1 day, October 8, 2016 Printing Engineering 04 65 COPE
5 Corel Draw 2 days, March 4-5, 2014 Printing Engineering 03 60 COPE
6 Print Design & Logo Design’ 5 days, August 2014 Printing Engineering 04 65 Trimitiya and COPE
7 Half Day workshop on ‘Pigment Structure and Pigment Properties’ by Mr. M. D. Mettelloo, GM Pigment Technical services, Sudarshan   Chemical Industries Ltd Half day 28 Feb, 2017 Printing Engineering 05 75 PVG’s COET
8 Full day workshop on 'Role of Pigments Pigment Dispersion in manufacturing of Printing inks' By Mr. Kausik Purakayastha, General Manager, Hi-Tech Inks, Pvt. Ltd. 1 day Oct. 8, 2016 Printing Engineering 05 83 PVG’s COET
9 Half day workshop on ‘Chemical Additive used in printing inks’ by Mr. Adesh B. Malkar, Technical service Manager, BYK Asia Pacific Pvt. Ltd. 1st April 2016 Printing Engineering 05 75 PVG’s COET
10 Workshop on COLOR on 2013 at PVG’s COET, Pune 15th and 16th January, 2013 Printing Engineering 08 - COPE
11 Workshop on Corel Draw by Anand Dixit 02 December 2013 Printing Engineering 03 70 PVGCOET
12 Industry- Alumni Advisory meeting 01 Day July 2014 Printing 10 - PVGCOET
13 Syllabus revision workshop 01 Day June 2013 Printing 15 - PVGCOET
  Seminars
Sr. No. Title of the Seminar Duration Organizing Department No. of Participants Sponsored by
Faculty Student
1 Expanded Color Gamut by Dr. Kiran Deshpande, Global Senior Expert Color Management, Siegwerk Half Day Printing Engineering 07 60 Circle of Printing Engineers (COPE)
2 ISO Standards for Offset Printing by Mr. Panthala Selvan, Managing Director, Idealliance, South Asia Half Day Printing Engineering 07 80 Circle of Printing Engineers (COPE)
3 Printing Industry 4.0 by Dr. Kiran Deshpande, Global Senior Expert Color Management, Siegwerk Half Day Printing Engineering 07 80 Circle of Printing Engineers (COPE)
4 Positive career opportunities and options After Covid-19 25th May 2020 Printing 07  48 Infinityy DMIT Centre, Pune
  5   Future of Screen Printing by Mike Young 1 Day 12 March, 2019 Department of Printing Engineering 07 100+ SGAI and PVG’s COET, Pune
6   Print Summit 19 1 Day 24th January, 2019 BMPA 02 10 BMPA
  7   Print Innovation 2018  Screen Printing Profitability and Computer to Scrren Technology 1 Day 17 December, 2018 Duratech Automation Pvt. Ltd., Mumbai 01 - Duratech
8   Printer’s Day 1 Day 26th February, 2018 BRBNMPL   02   - BRBNMPL
9 Interview Skills Half day January 30, 2018 Printing Engineering 02 60 Circle of Printing Engineers (COPE)
10 Leadership Skills Half day January 20, 2018 Printing Engineering 05 70 Circle of Printing Engineers (COPE)
11 Colour and research in Norway January 17, 2018.   Printing Engineering 04 65 Circle of Printing Engineers (COPE)
12 Future scope in Printed Electronics and Higher Education in Germany December 29, 2017 Printing Engineering 04 25 Circle of Printing Engineers (COPE)
13 Carrier Advance- ment in Printing September 15, 2017 Printing Engineering 04 - Circle of Printing Engineers (COPE)
  14   Industrial Safety March 18, 2017 Printing Engineering 10 130 Circle of Printing Engineers (COPE)
15   Interview Skills March 18, 2017 Printing Engineering 10 130 Circle of Printing Engineers (COPE)
  16   Printed Electronics March 18, 2017 Printing Engineering 10 130 Circle of Printing Engineers (COPE)
17   Critical components on Printing Machine March 18, 2017 Printing Engineering 10 130 Circle of Printing Engineers (COPE)
18 Web guide and Web Tension Controller March 18, 2017 Printing Engineering 10 130 Circle of Printing Engineers (COPE)
  19   Pigment structure and pigments for Printing Inks 1 day, February 28, 2017 Printing Engineering 05 63 Circle of Printing Engineers (COPE)
16   Advances in Flexo-Platemaking February 18, 2017 Printing Engineering 05 60 Circle of Printing Engineers (COPE)
  20   Digital Photography July 26, 2016 Printing Engineering 03 40 Circle of Printing Engineers (COPE)
21   CTP Technology July 9, 2016 Printing Engineering 02 55 Circle of Printing Engineers (COPE)
22 Additives for inks & coating April 1, 2016 Printing Engineering 05 60 Circle of Printing Engineers (COPE)
  23   Perfect Binding & PUR March 22, 2016 Printing Engineering 05 56 Well bound and Circle of Printing Engineers (COPE)
24   Electronic Publishing March 12,21 and 22, 2016 Printing Engineering 05 33 Circle of Printing Engineers (COPE)
  25   IGT Proofing systems July 20, 2015   Printing Engineering 06 40 IGT, Netherlands and COPE
26   Special properties of Screen Printing Inks 21st January 2015   Printing Engineering 03 30 COPE & FUJIFILM Sericol India Pvt. Ltd

Faculty Development Programs

Sr. No. Title of the FDP Duration Organizing Department No. of Participants Sponsored by
1 Patents 2 days, 3rd and 4th February 2017 Printing Engineering 07 IBS Management Institute in collaboration with PVG’s COET and COPE
  Training Program
Sr. No. Title of the Program Duration Organizing Department No. of Participants Sponsored by
Faculty Student
1 High Resolution Screen Printing 3 Days 10 to 12 Dec. 2018 Printing Engineering 01 - Screenset, Pune
2 Inkscape software 2 days July 2016 Printing Engineering 03 10 V- Labs, IIT, Powai
3 Training workshop on GWD 01 day March 2016 Printing 05 30 PVGCOET

Faculty Publications

List of Publications
Year Title of paper Name of the author/s Name of journal Year of publication ISBN /ISSN number
2019-20 Correlation of ink viscosity and printability in offset lithography process on paperboard used in packaging Madhura P. Mahajan, Swati Bandyopadhyay Acta Graphica Vol 29, No 3 2018 ISSN: 0353-4707
Characterization and optimization of color attributes chroma (C*) and lightness (L*) in offset lithography halftone print on packaging boards Madhura P. Mahajan, Swati Bandyopadhyay Color Research and Application 2019 ISSN:1520-6378
T-shirt Printing - Pros and Cons Prof. Mrs. Shrikala Kanade Print Miracle Magazine, Kerala Press Owners Association 2019 -
2018-19 Investigation of Half-tone Mottle in Coated Papers by Varying Gravure Process Parameters Dr. Akshay V. Joshi Journal of Engineering Science and Technology, Volume 13, No.9 2018 1823-4690
2017-18 Regression Modelling of Solid Mottle in Coated Papers Dr. Akshay V. Joshi Journal of Coatings Technology and Research, Springer 2017 1547-0091
2016-17 Statistical Modelling of Print half-tone mottle in PET-G and PVC Shrink Films Dr. Akshay V. Joshi Actagraphica 2016 0353-4707 (Print) 1848-3828 (Online)
Effect of Electrostatic Assist and Gravure Process Parameters on Voids and Dot Skips Reduction in Shrink PVC Film Dr. Akshay V. Joshi Journal of Coatings Technology and Research, Springer 2016 1547-0091
Investigation of Electrostatic Assist and Gravure Process Parameters on Solid Mottle Reduction for Shrink Films Dr. Akshay V. Joshi, Christoph Dettke and Joseph Steingraeber Journal of Coatings Technology and Research, Springer 2016 1547-0091
2015-16 Impact of Electrostatic Assist on Halftone in Shrink Films Dr. Akshay V. Joshi Actagraphica 2015 0353-4707 (Print) 1848-3828 (Online)
Effect of Ink Transfer on Print Mottle in Shrink Film Dr. Akshay V. Joshi and Dr. Swati Bandyopadhyay Journal of Coatings Technology and Research, Springer 2015 1547-0091
2014-15 Effect of Gravure Process Variables on Print Defects in Shrink Films Dr. Akshay V. Joshi and Dr. Swati Bandyopadhyay Journal of Coatings Technology and Research, Springer 2014 1547-0091
2013-14 Comparative Study of Printability Analysis on PVC CAST and PET-G Films Dr. Akshay V. Joshi and Dr. Swati Bandyopadhyay International Journal of Advanced Research in Engineering and Technology 2013 0976-6480 (Print) 0976-6499 (Online)
2012-13 Evaluation of Voids on Shrink PVC Film by Varying Gravure Process Variables Dr. Akshay V. Joshi and Dr. Swati Bandyopadhyay Actagraphica 2012 ISSN: 0353-4707 (Print) 1848-3828 (Online)

List of Major Laboratories

  1. Color Science and Measurement Lab
  2. Color Management and Standardization Lab
  3. Print Layout and Design Lab
  4. Digital Pre-press Lab
  5. Gravure Machines Lab
  6. Flexography Lab
  7. Print Finishing and Packaging Lab
  8. Material Science Lab
  9. Ink Testing Lab
  10. Offset Machines Lab
  11. Screen Printing Lab
List of Major Softwares
  • Corel Draw X8, Corel Draw 2019 upgrade (10 copies)
  • Adobe CS4
  • Adobe CS 6
  • Starproof Software
  • Express RIP
  • Gretagmacbeth Eyeone Publish Pro Bundle with PM5 software
  • Gretagmacbeth PM5 Packaging Bundle software
  • Image Analyzer, with DeXel Imaging software
  • IMP imposition software
  • Stylkit Folding Carton CAD
  • IMPACT 2019 Imposition Software from Arden
List of Special Equipments
  • Epson Proofer 4900 with Starproof RIP, Packaging option
  • Macmini
  • Epson thermal printer
  • Gretagmacbeth Spectro Eye
  • Teckon Spectro Dens
  • Mottle Tester, Missing dots and surface analyzer
  • Contact Angle Meter
  • Tensiometer
Special Facilities
E-Library with online subscriptions of
  1. Technical Association of Graphic Arts,
  2. Technical Association of Pulp and Paper Industry
  3. Imaging Science and Technology

Students’ Achievements

Students participate and win prizes in various curricular, cocurricular and extra curricular activities sports, paper presentation and project competitions, cultural events etc. Details of some events are as given below

Sports

Year 2019-20
Sr. No. Name of Student Class Name of Sport Event Rank / Position
1 Angus Nunes TE Football Inter college Runner up
2 Ajay Bankar SE Kabbadi Inter college 3rd
3 Prashant Thakre
Chetan Kene
TE Vollyball Inter college Participation
4 Mahesh Sanap Sandesh Tikande TE Kabbadi Inter college Participation
5 Suraj Gupta
Suyash Khedkar 
Ajit Rane
BE Cricket Inter college Participation
6 Ajit Rane TE Kho Kho Inter college Participation
7 Prajkta Tikam TE Chess Inter college Participation
8 Suraj Gupta
Onkar Bhusare
Sahil Jamdar
BE Volleyball Inter college Participation
Year 2018-19
Sr. No. Name of Student Class Name of Sport Event Rank / Position
1 Suraj Gupta, Onkar Bhusare, Shubham Adkune, Prashant Thakre Sahil Jamdar TE Volleyball Inter college Winner
2 Angus Nunes Shreyas Kalamkar SE Football Inter college Runner up
3 Suraj Gupta
Ajit Rane
TE Cricket Inter college Winner
4 Mahesh Sanap
Sandesh Tikande
TE Kabbadi Inter college Runner up
5 Suraj Gupta TE Football Inter college Winner
  Year 2017-18
Sr. No. Name of Student Class Name of Sport Event Rank / Position
1 Asmita Bafna SE Kho Kho Inter college Runner up
2 Mahesh Sanap, Sandesh Tikande SE Kabbadi Inter college Runner up
3 Suraj Gupta SE Cricket Inter college Winner
4 Angus Nunes Shreyas Kalamkar FE Football Inter college Runner up
5 Suraj Gupta Onkar Bhusare Shubham Adkune Sahil Jamdar SE Volleyball Inter college Participation
  Year 2016-17
Sr. No. Name of Student Class Name of Sport Event Rank / Position
1 Yuvraj Kailas Patil TE Swimming Maharashtra State Paralympic swimming competition Gold
2 Suraj Gupta, Sahil Jamdar Onkar Bhusare, Ajit Rane,Swapnil Sonar,Shubham Adkune SE Volleyball Elevate PICT Runner up
3 Ajit Rane SE Kho Kho Inter college Participation
4 Suraj Gupta SE Cricket Inter college Participation

Other Achievements

Project and paper presentation competitions, cultural and other events Year
Award or Grant received by the student in the respective year should be mentioned.
2019-20
Sr. No. Name of Student Class Category Event Rank / Position
1 Mayuri Argade
Kirti Gunjal
Sunayna Kadam
Nish Pahune
Under the guidance of Prof. Laxmi Sapkal
BE Student Category Tom Freska Student Printing Competition by SGIA, USA Certificate of Merit
2018-19
Sr. No. Name of Student Class Category Event Rank / Position
1 Tejas Jape
Sahil Jamdar
Vivek Borse
Nikhil Bhoite
TE Student Category MEDIA CARNIVAL Manipal Winner
2 Nikhil Bhoite TE Student Category Photography, MEDIA CARNIVAL Manipal Winner
3 Vivek Borse TE Student Category Music mix, MEDIA CARNIVAL Manipal Runner up
4 Asmita Bafna TE Student Category Dance Participation
2017-18
Sr. No. Name of Student Class Category Event Rank / Position
1 Ruchi Abhang, Navnath Pable, Vishal Panchal, Shubhashree Pasalkar Guide: Prof. Laxmi Sapkal TE Student Category Tom Freska Student Printing Competition by SGIA, USA Award of Excellence
2 Ruchi Abhang, Navnath Pable, Vishal Panchal, Shubhashree Pasalkar Guide: Prof. Laxmi Sapkal TE Industry Category Specialty Graphic Imaging Association, Competition, USA Gold Award
2016-17
Sr.  No. Name of Student Class Category Event Rank / Position
1 Hemant Mandwade, Siddhesh Ghagre, Priyanka Chakote, Mokshada Nirwan Guide: Prof. Laxmi Sapkal TE Student Category India Star ,The National Award of Excellence in Packaging Award of Excellence
2 Hemant Mandwade, Suraj Giri, Nachiket Gawande, Prasad Morbale, Guide: Prof. Laxmi Sapkal TE Student Category Tom Freska Student Printing Competition by SGIA, USA Award of Excellence
2015-16
Sr. No. Name of Student Class Category Event Rank / Position
1 Pawan Khake, Shubham Kharat Ashok Khade Guide: Prof. Laxmi Sapkal TE Student Category Tom Freska Student Printing Competition by SGIA, USA Best of Show and Award of Excellence
2 Harsha, Bharat K, Tejas T. N. TE Student Category India Star, Innovative Package Design Competition
3 Tejas Thathe, Amit Kumar Singh TE Student Category India Star, Innovative Package Design Competition I
4 Tejas Tathe, Jyoti Dhamale TE Print Quiz Impressions 1st Prize
5 Tejas Tathe, Varsha Amte TE Build the Box Impressions 2nd Prize
6 Bharat KV TE Paper Presentation Impressions 1st Prize

PRINTING ENGINEERING STUDENTS’ ASSOCIATION (COPE)

Circle of printing Engineers (COPE) was formed in the year 1996. COPE organizes many activities, such as, organizing guest lectures, industrial visits, co curricular and extracurricular events, social activities etc. throughout the year. COPE maintains student’s library in the Printing department which consists of reference books, seminar reports and project reports for reference. Some of the activities of COPE are highlighted as below

Following activities are conducted during current academic year 2019-20
Various curricular, co-curricular and extracurricular activities are organized for students through Circle of Printing Engineering (COPE). Prof. L. D. Sapkal is working as COPE Staff Coordinator.

COPE Committee for AY 2019-20
Post Name of Student Post Name of Student
General Secretary Sudhir Abhang
Yash Kalkhaire
Manish Talekar
Nayan Barhate
Prajakta Shetye
Taraquee Nalawade
Vinay Sarak
Treasurer Mahesh Shinde Co-treasurer Shyam Laturia
Activities Performed
  1. Technical Events Print Era
  2. Blood Donation Camp
  3. Guest Lectures
  4. Effective use of Color in Advertising by Mr. Anand Dixit, Corol Elements
  5. Effective Design Requirements by Mrs. Bhargavee Kanade, Brandonomics
  6. Goal Settings by Mr. Manohar Nair, Manuscript Communications
  7. Insights on Marketing as a career in Printing By Mr. Karan Vidhate, Mr. Saurabh Unde, Print Plus
  8. Work Ethics and basic CV writing skills by Mr. Swarnangka, Technova
  9. Industrial Visits : S. E (printing, 54 students)
  10. Ballarpur Industries Limited, Bhigwan,
  11. Harshad Packaging,Baramati
  12. Screen Set, Pune
  13. Shrotri Printing Press
  14. R. Offset and ScreenSet in Pune on 7th September 2019
  15. BILT and Harshad Packwell, Baramati on 19th September 2019
  16. MOS and Print Plus , Navi Mumbai on 28th September 2019
  17. Technical Workshops and Technical Seminar
  18. Box making workshop for SE Printing by Mr. Sumedh Kapare
  19. Working and Types of Laser Printer by HP India
  20. Basics of Flexo Prepress – Mr. Ganapathy Thillai, Esko India
  21. Being a Graphic Designer – Mr. Anand Dixit, Ms. Janhavi Bijur, Mr. Bhargav Mistry and Mr. Sameer Malkapur
  22. Outreach activities
  23. Aim for August, Aim for Attendance organized by department to improve students attendance.
  24. Come September – One day, one event
  25. Conducted quiz for BE students to make them aware about their liking and which field they want to study further or have career into.
  26. T&P have organized Seminar on Higher Education by Byju’s online training institute
  27. Women Empowerment week – 1st Week of October
  28. Motivational Poster for classrooms - Poster designing competition for Printing Students
  29. Webinar on Importance of Higher Education by Dr. Kiran Deshpande, Mr. Murad Kalal, Mrs. Nikhat Suhel, Mr. Rohan Kulkarni
  30. Webinar on Being an Entrepreneur – Mr. Harshad Doshi, Mr. Ameya Joshi. Mr. Aditya Deshpande, Mr. L. Ramanathan, Mr. Rohan Ratanpal
  31. Quiz organized on E-magazine April 2020 issue of SPI
Following activities are conducted during current academic year 2018-19
Various curricular, co-curricular and extracurricular activities are organized for students through Circle of Printing Engineering (COPE). Prof. L. D. Sapkal is working as COPE Staff Coordinator.
COPE Committee for AY 2018-19
Post Name of Student Post Name of Student
General Secretary Tejas Jape, Soham Kothari, Vaibhav Gaikwad, Shivam Haranmare Harshit Shah Jt. General Secretary
Treasurer Gayatri Anaspure
Activities Performed:
  1. Technical Events Print Era
  2. Blood Donation Camp
  3. Guest Lectures
  4. Industrial Visits
  5. Technical Workshops and Technical Seminar
  6. Outreach activities
Following activities are conducted during current academic year 2017-18
Various curricular, co-curricular and extracurricular activities are organized for students through Circle of Printing Engineering (COPE). Prof. L. D. Sapkal is working as COPE Staff Coordinator.
COPE Committee for AY 2017-18
Post Name of Student Post Name of Student
General Secretary Saurabh Suryawanshi Jt. General Secretary Shreekrushna Shirke
Treasurer Ms. Gayatri Anaspure
Activities Performed
  1. Technical Events Print Era
  2. Blood Donation Camp
  3. Guest Lectures
  4. Industrial Visits
  5. Technical Workshops and Seminar
  6. Outreach activities
Following activities are conducted during current academic year 2016-17
Various curricular, co-curricular and extracurricular activities are organized for students through Circle of Printing Engineering (COPE).
COPE Committee for AY 2016-17
Post Name of Student Post Name of Student
General Secretary Sunil Ghumre Jt. General Secretary Hemant Mandawade
Treasurer Suraj Nair Omkar Mhetre
Activities Performed
  1. Technical Events Print Era
  2. Blood Donation Camp
  3. Guest Lectures
  4. Industrial Visits
  5. Technical Workshops and Technical Seminar
  6. Outreach activities
Following activities are conducted during current academic year 2015-16
Various curricular, co-curricular and extracurricular activities are organized for students through Circle of Printing Engineering (COPE).
COPE Committee for AY 2015-16
Post Name of Student Post Name of Student
General Secretary Nikhil Deshmukh Jt. General Secretary Amar Thombare
Treasurer Suraj Nair Omkar Mhetre


Activities Performed
  1. Technical Events Print Era
  2. Blood Donation Camp
  3. Guest Lectures
  4. Industrial Visits
  5. Technical Workshops and Technical Seminar
  6. Outreach activities
Following activities are conducted during current academic year 2014-15
Various curricular, co-curricular and extracurricular activities are organized for students through Circle of Printing Engineering (COPE).
COPE Committee for AY 2014-15
Post Name of Student Post Name of Student
General Secretary Pawan Khake Jt. General Secretary Abhishek Zanwar
Treasurer Pawan Khake


Activities Performed
  1. Technical Events Print Era
  2. Blood Donation Camp
  3. Guest Lectures
  4. Industrial Visits
  5. Technical Workshops and Technical Seminar
  6. Outreach activities
Following activities are conducted during current academic year 2013-14
Various curricular, co-curricular and extracurricular activities are organized for students through Circle of Printing Engineering (COPE).
COPE Committee for AY 2013-14
Post Name of Student Post Name of Student
General Secretary Rajesh Jadhav Jt. General Secretary Pratik Rathi
Treasurer Girish Deshpande Pawan Khake


Activities Performed
  1. Technical Events Print Era
  2. Blood Donation Camp
  3. Guest Lectures
  4. Industrial Visits
  5. Technical Workshops and Technical Seminar
  6. Outreach activities

Interaction with Outside World

  • Sponsored Projects
  • Funded Projects
  • Guest Lectures
  • Internship
  • Technical Event By Department
  • Reviewer/Judges

Department of Printing Engineering Sponsored UG projects

Year No of students completed sponsored projects
2013-14 04
2014-15 03
2015-16 04
2016-17 05
2017-18 05
2018-19 08
2019-20 10
   
Year 2019-20
Name of the students completed sponsored projects
S. No. Name of the Students Sponsor Title
1 Mahima Yadav Parakh Agro Ltd., Bhandgaon, Pune Implementation of G7 for Gravure Printing Process
Vaibhavi Bankar
Harshit Shah
Aarti Mapari
Mrunmayee Dhavangale
2 Abhishek Borkar Avantika Printers Pvt. Ltd., New Delhi Comparative Analysis of Gray Balance on Proofer By FanGraph and Curve Method
Dinesh Marathe
Pradeep Rathod
Jay Kale
Nikhil Kothawade
3 Atharva Datar Screenset, Pune Optimization of Passive Components on Different Substrates Used in Printed Electronics
Rutuja Mahindrakar
Pranav Jadhao
Shubham Adkune
Pranav Chaudhari
4 Yuvraj Patil Screenset, Pune Printed Heater for Smart Packaging Application
Vaibhav Bramhankar
Yogesh Pharande
Aman Kshirsagar
Prashant Khopde
5 Soham Kothari PRS Permacel Effect of Different Squeegee Parameters on Screen Print Quality
Sameer Pawar
Sanket Bandal
6 Mayuri Argade PRS Permacel Analysis and Optimization of Screen Process Parameters
Kirti Gunjal
Nisha Pahune
Sunayna Kadam
7 Vivek Borse Bilt Graphic Paper Products Ltd. and ITC Paper and Paperboards Ltd. To Evaluate the Influence of Base Paper Sizing Characteristics on Printability/ Runnability in Commercial Offset Printing
Tejas Jape
Pranita Bhagat
Prathamesh Khade
Sahil Jamdar
8 Shriniwas Kulkarni Bilt Graphic Paper Products Ltd. and ITC Paper and Paperboards Ltd. Effect of Optical Brightening Agents on Paper on Printability In Offset Printing
Hrushikesh Kulkarni
Gayatri Anaspure
Asmita Bafna
Vaibhav Gaikwad
9 Nikhil Bhoite Walter Pack Automotive Products India Pvt.Ltd Effect and Analysis of Screen Coating on Print Quality
Suraj Gupta
Abhishek Raskar
Navnath Rupnar
Vrushali Salunke
10 Onkar Bhusare Walter Pack Automotive Products India Pvt.Ltd Effect and Analysis of Screen Stretching on Print Quality
Vinit Gunjal
Harshal Shinde
Anant Waghmare
Akshay Bagade
Year 2018-19
Name of the students completed sponsored projects
S. No. Name of the Students Sponsor Title
1 Ruchi Abhang Parakh Agro Ltd., Bhandgaon, Pune Future Ready Sustainable Packaging
Vishal Panchal
Ajay Mali
Vaibhav Tawade
Prafulla Patel
2 Ajay Rode Parakh Agro Ltd., Bhandgaon, Pune Evaluation of Flexo Printability with Water Based Inks
Yogesh Suryawanshi
Tejas Ambalkar
Shreeshailya Takale
Pratap Thombare
3 Ajay Jagtap, ITC Paper and Paper Boards Ltd.   Huber Group To Study the Factors Affecting Ink Migration In Offset Lithographic Printing Process
Meet Rabara,
Radhika Sathe,
Pranav Baheti,
Sagar Patil
4 Mr. Kulkarni Venkatesh Ballarpur Industries Limited To Evaluate Ink and Coating Interaction for Print Mottle Effect In Commercial Offset Printing
Mr. Jetlag Rishabh
Mr. Lawate Vishwajit
Ms. Mestry Sampada
Ms. Shinde Disha
5 Ramkrishna Chavan Screen Set, Pune To Achieve Optimal Ink Film Thickness Of Text And Graphics In Braille Print Using Screen Printing Technique
Vaibhav Doiphode
Rohit Ovhal
Pravin Tate
Amol Mule
6 Akash Adkekar Keetronics (India) Pvt. Ltd. Feasibility Study of Printing EL Lamp on Domestically Manufactured SBB used for Packaging
Pravin Bhosure
Swapnil Chaudhari
Atharva Londhe
Abhineel Jadhav
Shubhashree Pasalkar
7 Prashant Wakchaure Screenset To find retention of electrical functionality after finishing
Ishwar Dhindale
Vijay Sirsat
Kiran Bansude
Vipul Makude
Krishana Shirke
8 Shailesh Nale BILT Synthesis and Properties of Biodegradabale Blend of Natural Rubber and Starch
Soham Shilimkar
Yashoda Sutar
Akshay Dabhade
Santosh Gharge
Year 2017-18
Name of the students completed sponsored projects
S. No. Name of the Students Sponsor Title
1 Ganesh Jondhale Siegwerk India Pvt. Ltd. Effect of Surface Tension on Flexo Printability
Machhindra Chaure
Varad Kalyani
2 Hrushikesh Sakhare Parakh Agro Effect of Paper Properties on Flexo Print Quality with Solution to Environment Issues in Flexible Packaging
Nachiket Gawande
Suraj Giri
3 Aishwarya Barkul Emami Paper Mills Ltd. ITC Paper and Paper Boards Ltd. Huber Group To Analyze Effect of Paper Board Properties & Pre-Press Properties on the Print Quality in Offset Lithography
Atul Watmode
Mayur Supe
Nikita Lakade
Tejas Agrawal
4 Abhishek Mahajan Keetronics (India) Pvt. Ltd. Optimization of Printed Humidity Sensor by Investigating Effect of Material and Print Parameters
Rishab Rathore
Niranjan Naikwadi
Aishwarya Hinge
Manisha Wakchaure
5 Prajakta Adhari Screen Set, Pune To Design Prototype For Text And Graphic Reproduction For Visually Impaired Community Using Screen Printing Technique
Shubhangi Darphe
Pravin Gavali
Prasad Morbale
Komal Padval
Year 2016-17
Name of the students completed sponsored projects
S. No. Name of the Students Sponsor Title
1 Vishal Agrwal Parakh Agro Optimization of Flexo Process Parameters To Reduce Overall Manufacturing Cost
Ashutosh Akhade
Pritesh Gaikwad
Aditya Jathar
Suraj Kapparathu
Amar Thorat
HimanshuWani
2 Ajay Linge Huber Group To evaluate relationship between flow properties of ink and optical properties on printability.
Akash Rajurkar
Anuja Gite
Mansi Puro
Vishal Kashid
Sagar Paulbuddhe
3 Bharat Chavan Cosmo and Garware Films Comparative analysis of surface treatment on various plastic films
Santosh
Nikeetha Bhosale
4 Ankit Ahirrao Keetronics (India) Pvt. Ltd. Investigation of printed conductive structures with different parameters by using conventional printing technologies
Chetan Jadhav
Shubham Jagtap
Suyash Markad
Prashant Suryawanshi
5 Ganesh Bhoite Screen Set, Pune Developing economical prototype for visually impaired students by screen printing method on paper
PallawiPawar
ChinmayeeThakurdesai
Tushar Dalve
Madhumati Dhumal
Year 2015-16
Name of the students completed sponsored projects
S. No. Name of the Students Sponsor Title
1 Bharath K V. United Way Worldwide Grant on behalf of generosity from OMNOVA SOLUTIONS FOUNDATION USA Effect of Electrostatic Assist and Gravure Process Parameters on Ink Transfer for Coated Papers
Mohit Chaudhari
Padmaja G.S.V.S.
Pratik Borude
Tejash T N.
2 Anagha Dharmadhikari Huber Group Evaluating Effect of IPA Substitute and Varying Physical Parameters of Offset Ink on Printability
Shivkumar Dhopate
Kajal
Tejas Tathe
Deepak Thombare
3 Amit Singh Cosmo Films Evaluation of Retention of Corona Treatment on BOPP film
Mahesh Pundge
Suraj Patil
4 Devkar Amar Graphica Flexotronica Developing economical prototype for visually impaired students by screen printing method on paper
Sonwane Narayan
Gangaji Abhimanyu
Kale Gopal
Garje Shriram
Year 2014-15
Name of the students completed sponsored projects
S. No. Name of the Students Sponsor Title
1 Harsha A. United Way Worldwide Grant on behalf of generosity from OMNOVA SOLUTIONS FOUNDATION USA Effect of Electrostatic Assist on Defect Reduction in Shrink Films
Sachin Kamble
Nitesh Karande
Ajinkya Lanke
Ravi Kiran P. S.
Venkatesh Murthy S.
Vishal Patil
2 Eshan Gautam Huber Group Effect of Pigment Particle Size of Offset Inks on Printability Effect of Change In Viscosity Of Inks On Print Quality On Alcohol And Conventional Dampening System
Manali Kulkarni
Akshay Shinde
Suchitra Shinde
Yogesh Piprewar
3 Deepak Masal Micro Inks Developing data base for ink matching
Prasanna Nahar
Prashant Pachorkar
Anuraj Shinde
Hitali Nagar
Year 2013-14
Name of the students completed sponsored projects
S. No. Name of the Students Sponsor Title
1 Himanshu Rana United Way Worldwide Grant on behalf of generosity from OMNOVA SOLUTIONS FOUNDATION USA Evaluation of Print Defects on Shrink Films
Huzaifa Khanjiwala
Atik Pathan
Raghvendra Kumar
Vinay Gandhi
2 Payal K. Firodiya Huber Group Effect of Rheology of Offset inks on Printability
Anant M. Sadegaonkar
Chetan A Khairnar
Arundhati Anadrajan
Prashant V. Sagvekar
3 Abhay Pidurkar Pudhari Press Automatic blanket washing device for offset press
4 Varsha Gawade International Paper To increase the brightness of Kraft paper and recycled newsprint paper
Sheetal Saha
Sushil Tandale
Govind Vibhute

Funded Projects

S. No. Name of the person Project Title Funding Agency Grants Comme-ncement Duration
1. Dr. Akshay V. Joshi Effect of Electrostatic Assist on Gravure Printability United Way Worldwide Grant on behalf of generosity from OMNOVA SOLUTIONS FOUNDATION USA 5,78, 025 2017 01 year
2. Dr. Akshay V. Joshi Optimization of Flexo Process Parameters to Reduce Overall Manufacturing Cost Windmöller & Hölscher India Private Limited, India 3,00, 000 2016 01 year
3 Dr. Akshay V. Joshi Effect of Ink Transfer on Gravure Print Quality United Way Worldwide Grant on behalf of generosity from OMNOVA SOLUTIONS FOUNDATION USA 6,05, 404 2015 01 year
4. Dr. Akshay V. Joshi Effect of Electrostatic Assist on Defect Reduction in Shrink Films United Way Worldwide Grant on behalf of generosity from OMNOVA SOLUTIONS FOUNDATION USA 11,52,274 2014 01 year
5. Dr. Akshay V. Joshi Investigation of Print Mottle on Shrink Films United Way Worldwide Grant on behalf of generosity from OMNOVA SOLUTIONS FOUNDATION USA 10,78,270 2013 01 year
Major Research Projects completed/ongoing in last five years
  1. Title: Effect of Electrostatic Assist on Gravure Printability

    Duration: 1 year
    Principal Investigator: Dr. Akshay V. Joshi
    Amount: Rs. 5,78, 025/-

    Research Outcomes
    • The ink transfer from gravure cell to the substrate was improved at 19 sec ESA current of 1.4 mA, 10 kV voltage with 3 mm air gap.
    • Reduction in solid mottle by 69.95% and 91.53% and reduction in halftone mottle by 65.27% and 61.94% for both NC and NC-PU inks respectively.
    • Enhancement in print gloss by 12.04% and 17.97% for both NC and NC-PU
    • Speckles completely eliminated for both the inks.
    • Dot circularity for NC and NC-PU inks was enhanced by 2% at 60 lpcm, 21 sec viscosity, 12 kV and 1.5 mm air gap.
  2. Title: Optimization of Flexo Process Parameters to Reduce Overall Manufacturing Cost

    Duration: 1 year
    Principal Investigator: Dr. Akshay V. Joshi
    Amount: Rs.3, 00,000/-

    Research Outcomes:
    • Optimized settings led to reduction in ink gsm by 18% with desired Delta E and overall improvement in printability by 27%.
    • Viscosity, Anilox Volume, Plate Type and Substrate Opacity are significant in minimizing print defects and enhancing printability.
    • Higher substrate opacity resulted in lower ink GSM with Delta E and print density in a tolerable window frame.
    • Increasing the substrate opacity is more cost effective as the price of master batch is lower than ink cost.
    • The findings of this study shall save an overall Rs. 3 per kg for 8-color commodity or specialty job.
  3. Title: Effect of Ink Transfer on Gravure Print Quality

    Duration: 1 year
    Principal Investigator: Dr. Akshay V. Joshi
    Amount: Rs.6, 05, 404/-

    Research Outcomes:
    • Ink laydown was optimal at60 l/cm in both 50 GSM and 65 GSM C1S paper substrate.
    • The print defects were reduced by 50.07% and 54.39% in 50 GSM and 65 GSM,
    • Optimal ink transfer on the substrate was observed at 19 sec viscosity,      667 m/s speed, 1.2 mA and 1.1 mA ESA current for 50 GSM and 65 GSM        achieved at 10 kV voltage and 3 mm air gap.
    • The improvement in solid mottle, halftone mottle, print gloss and line jaggedness was found to be 61.30%, 84.39%, 14.33% and 39.67% for 50 GSM while 52.38%, 83.62%, 6.68% and 74.89% for 65 GSM C1S paper.
    • The missing dots were completely eradicated for both the substrates.
  4. Title: Effect of Electrostatic Assist on Defect Reduction in Shrink Films

    Duration: 1 year
    Principal Investigator: Dr. Akshay V. Joshi
    Amount: Rs. 11,52,274/-

    Research Outcomes:
    • Void area was minimized by 96%.
    • Solid mottle was reduced by 57% for PVC and 54% for PETG
    • Halftone mottle was minimized by 33% for PVC and 32% for PETG
    • Dot skips was eradicated by 100% for PVC and PETG.
    • The statistical model equations showed R-sq > 90% indicating a good fit of the model with experimental data for the print defects.
    • Psycho-physical analysis for mottle revealed identical results with instrumental
  5. Title: Investigation of Print Mottle on Shrink Films

    Duration: 1 year
    Principal Investigator: Dr. Akshay V. Joshi
    Amount:Rs. 10, 78, 270/-

    Research Outcomes:
    • Solid mottle was reduced by 50% for PVC and 34% for PETG at 70 lpcm line screen while 35% for PVC and 28% for PETG at 130 degree stylus angle.was minimized by 96%.
    • Halftone mottle was minimized by 28% for both PVC and PETG at 70 lpcm line screen while 28% for PVC and 26% for PETG at 130 degree stylus angle.

Guest Lectures Organized

Guest Lecture organized during current academic year 2019-20
  1. Packaging and it’s Applications by Harshad Doshi
  2. Effective use of Color in Advertising by Mr. Anand Dixit, Corol Elements
  3. Effective Design Requirements by Mrs. Bhargavee Kanade, Brandonomics
  4. Goal Settings by Mr. Manohar Nair, Manuscript Communications
  5. Insights on Marketing as a career in Printing By Mr. Karan Vidhate, Mr. Saurabh Unde, Print Plus
  6. Work Ethics and basic CV writing skills by Mr. Swarnangka, Technova
Guest Lecture organized during current academic year 2016-17
  1. Future scope in Printed Electronics and Higher Education in Germany By Mr. Chaitanya Bapat, Alumni 2005
  2. Career Advancement in Printing by Mr. Pankaj Aute, Ajanta Packaging Sharjah, UAE
  3. Industrial Safety by Mr. Pradip Ghaisas, Technova Imaging Systems (P) Ltd
  4. Interview Skills by Mr Karan Vidhate, Burda Druck India Pvt ltd.
  5. Printed Electronices by Mr. Vithyasahar S, Keetronics India Pvt Ltd,
  6. Critical Components in Gravure M/c by Mr. Jayesh Pathare, ATE Enterprises Pvt Ltd.
  7. Web guide and Web Tension Controller by Mr. Rajesh Parab, E+L India Pvt Ltd.
  8. Advanced Photography by Mr. Kedar Bhat, Pixel Compo.
  9. Pigment Structure and Pigments for Printing Inks by Mr. M.D. Mettelloo, Sudarshan Chemicals.
  10. Advances in Flexo Platemaking by Mr. Vidhu Gautam and Mr Abraham Prabhakar , Kodak
  11. Improving Communication Skills & Mock by Mr. Yogesh Borse, IFHE
  12. Digital Photography by Mr. Santosh Jain (Wildlife Photographer)
  13. CTP Technology by Mr. Abhiram Sathe (Kodak India Pvt Ltd.)
Guest Lecture organized during current academic year 2015-16
  1. Additives for Inks & Coatings by Mr. Adesh Malkar, BYK India
  2. Perfect Binding & PUR by Mr. Dinesh Ingawale and Mr. Shakti Naden, Welbound
  3. Electronic Publishing by Mrs Shreekala Sane Kanade
  4. Print Prodution Techniques by MR. Santosh Jain(Wildlife Photographer)
  5. Stress Management by Mr. Shreekant Latkar, Art of Living.
  6. Digital Photography by Mr. Santosh Jain (Wildlife Photographer)
  7. IGT Proofing Systems by Mr. Andre Verhoeven, IGT Testing System
  8. Team Building Skills by Ms Arundhati Anandrajan and Ms. Nishigandha Adik, Avery Dennison
  9. Special Properties of Screen Printing Inks by Mr. Manish Vaste, Fujifilm Sericol India Pvt Ltd.
  10. Interview Skills by Mr. Karan Vidhate, Burda Druck
  Guest Lecture organized during the academic year 2014-15
  1. Guest Lecture and Demonstration by Trimitya
  2. CTP by Fuji Film
  Guest Lectures organized during the academic year 2013-14
  1. Guest lecture by Mr. N. N. Joshi (COO, VALPRO Solutions )
  2. Steywork by Mr. Umesh Bhande
  3. Camera Guidance by Mr. Mukul Kulkarni
 

Guest Lecture delivered

Guest Lecture delivered during current academic year 2018-19
  1. Suksawad Converting Ltd., Bangkok on Design of Experiments for Gravure Printability
  Guest Lecture delivered during current academic year 2018-19
  1. Metal Roller Company, Bangkok on Effect of Cylinder Parameters on Ink Transfer in Gravure and it’s Importance for G7 Calibration
  2. Suksawad Converting Ltd., Bangkok on Effect of Process Parameters on Gravure Printability for G7 Calibration
  Guest Lecture delivered during current academic year 2017-18
  1. Bharatiya Reserve Bank Note Mudran Pvt. Ltd, Mysuru on Application of Flexo Process for Bank Notes
  Guest Lecture delivered during current academic year 2015-16
  1. Kala Niketan Polytechnic College, Jabalpur, Madhya Pradesh on Role of Gravure in Flexible Packaging.
  Guest Lecture delivered during current academic year 2013-14
  1. Kala Niketan Polytechnic College, Jabalpur, Madhya Pradesh on Role of Gravure and Flexography in Packaging.
 

Internship

Internship Data for last five years
Year S.No. Name of the partnering institution industry/research lab with contact details Year Duration (From-To) Name of students
2019-20 1 Eugen Printing and Packaging, Talawade, Pune 2019 12/12/19-27/12//19 Aishwarya Lute
2 Eugen Printing and Packaging, Talawade, Pune 2019 12/12/19-27/12//19 Krishnaraj Mokashi
3 Eugen Printing and Packaging, Talawade, Pune 2019 12/12/19-27/12//19 Manthan Sarwade
4 Eugen Printing and Packaging, Talawade, Pune 2019 12/12/19-27/12//19 Ashutosh Shirkande
5 Eugen Printing and Packaging, Talawade, Pune 2019 12/12/19-27/12//19 Sharad Hange
6 Eugen Printing and Packaging, Talawade, Pune 2019 12/12/19-27/12//19 Aditi Modi
7 Screen set, Pune 2019 20/12/19 to 3/1/20 Harshvardhan Mahajan
8 K Joshi & Co., Pune 2019 20/9/19-20/10/19 Harshvardhan Mahajan
9 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Yogesh Arthamwar
10 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Sharad Hange
11 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Samiksha Suki
12 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Aishwarya Lute
13 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Mahesh Shinde
14 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Revati Hardikar
15 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Rahil Shaikh
16 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Manish Talekar
17 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Ashutosh Shirkande
18 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Manthan Sarwade
19 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Krishnaraj Mokashi
20 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Abhishek Jirwankar
21 Akruti Print Solutions Pvt. Ltd., Parvati Pune 2019 12/8/19 – 12/10/19 Sandesh Tikande
22 Bilcare Ltd. 2019 13/6/19 – 28/06/19 Apurv Sutar
23 Bilcare Ltd. 2019 13/6/19 – 28/06/19 Piyush Khaire
24 Bilcare Ltd. 2019 13/6/19 – 28/06/19 Shubham Naikare
25 K Joshi & co 2019 20/9/19 – 20/10/19 Aditya Jha
26 Dr. PDKV University Printing Press, Akola 2019 1/6/19 to 30/6/19 Yogesh Pharande
27 Casio India Pvt. Ltd 2019 1/6/19 to 30/6/19 Yogesh Pharande
28 Yuva Polyprint And Packaging Industry 2019 1/6/19 to 15/6/19 Revati Hardikar
29 Yuva Polyprint And Packaging Industry 2019 1/6/19 to 15/6/19 Rahil Shaikh
30 Yuva Polyprint And Packaging Industry 2019 1/6/19 to 15/6/19 Sharad Hange
31 Yuva Polyprint And Packaging Industry 2019 1/6/19 to 15/6/19 Sandesh Tikande
Total: 31
Year S. No. Name of the partnering institution industry/research lab with contact details Year Duration (From-To) Name of students
2018-19 1 K Joshi &Co. 2018 12/12/18 - 27/12/18 Abhishek Raskar
2 K Joshi &Co. 2018 12/12/18 - 27/12/18 Vrushali Salunke
3 Dhanlaxmi Offset 2019 1/6/19 - 15/6/19 Vrushali Salunke
4 Shreeyash Printing Services 2019 1/6/19 - 15/6/19 Rahil Shaikh
5 Shreeyash Printing Services 2019 1/6/19 - 15/6/19 Revati Hardikar
6 Shreeyash Printing Services 2019 1/6/19 - 15/6/19 Sharad Hange
7 Unique Offset 2019 15 Days Gayatri Anaspure
8 Decal Tech 2019 15 Days Mahima Yadav
9 Decal Tech 2019 15 Days Vaibhavi Bankar
10 Pratiroop Mudran 2019 15 Days Rutuja Mahindrakar
11 Trigon Digital Solution 2019 1/6/19 - 3/7/19 Aarti Mapari
12 K Joshi &Company 2019 15 Days Pranav Jadhao
13 Libra Printers 2019 8 Days Tejas Jape
14 Eugen Printers 2019 10 Days Tejas Jape
Total: 14
2017- 18 1 Hi-tech Inks Pvt ltd. 2018 12/6/18 - 27/6/18 Sanket A. Bandal
2 Shriram Polyproplene Ind. 2018 1/6/18 - 30/6/18 Akhil Tathe
3 N.R. Enterprises 2018 15/6/18 - 30/6/18 Krishna Kashid
4 N.R. Enterprises 2018 15/6/18 - 30/6/18 Soham Shilimkar
5 N.R. Enterprises 2018 15/6/18 - 30/6/18 YashodaSutar
6 N.R. Enterprises 2018 15/6/18 - 30/6/18 ShaileshNale
7 The Times Group 2018 2/1/18 - 15/1/18 Anagha Jadhav
8 SAP Print Solution 2018 15/6/18 - 30/6/18 Abhineel Jadhav
9 Trigon Digital Solution 2018 1/6/18 - 30/6/18 Ruchi Abhang
10 K Joshi &Co. 2018 6/6/18 - 6/7/18 ShubhashriPasalkar
11 Lalit Enterprises 2018 14/12/17 - 31/12/17 SwapnilChaudhari
12 K Joshi &Co. 2018 18/6/18 - 30/6/18 Rohit Sachin Chavan
13 S.S.Printer 2018 03-12-2018 Yuvraj Patil
14 Parksons Packaging Ltd. 2018 6/6/2018 -28/6/2018  Meet Rahara
15 PREPCA 2018 15/12/17 - 15/1/18 Akash Adkekar
16 Parksons Packaging Ltd. 2018 6/6/2018 - 28/6/2018 Radhika Sathe
17 Parksons Packaging Ltd 2018 6/6/2018 - 28/6/2018 Vinit Gunjal
18 Parksons Packaging Ltd 2018 6/6/2018 - 28/6/2018 Pranav Baheti
19 Parksons Packaging Ltd 2018 6/6/2018 - 28/6/2018 Jagtap Ajay
20 Beed Reporter 2018 1/6/2018 - 1/7/2018 Ramchandra
21 PixoDirect 2018 10 Days Shinde Baliram
22 Vikram Printers 2018 15 Days Mahima Yadav
23 Akshar Graphics 2018 21 Days Vaibhavi Bankar
Total: 23
2016- 17 1 Repro India Ltd. 2017 2/6/17 - 30/6/17 Chavan Akshay
2 Repro India Ltd. 2017 2/6/17 - 30/6/17 Pacharne Sudarshan
3 Repro India Ltd. 2017 2/6/17 - 30/6/17 Parerao Nikhil
4 Repro India Ltd. 2017 2/6/17 - 30/6/17 Kalyani Varad
5 Repro India Ltd. 2017 2/6/17 - 30/6/17 Ghumre Sunil
6 Repro India Ltd. 2017 2/6/17 - 30/6/17 Ghumre Avinash
7 Repro India Ltd. 2017 2/6/17 - 30/6/17 Bankar Shankar
8 S.S.Printers 2017 2/6/17 - 30/6/17 Lambhate Akshay
9 S.S.Printers 2017 2/6/17 - 30/6/17 Mhetre Omkar
10 S.S.Printers 2017 2/6/17 - 30/6/17 Landge Nikhil
11 Vinod Printers 2017 12/6/17 - 30/6/17 Barkul Aishwarya
12 Vinod Printers 2017 12/6/17 - 30/6/17 Padval Komal
13 Akruti Printers 2017 1/6/17 - 15/7/17 Darpe Shubhangi
14 Akruti Printers 2017 1/6/17 - 15/7/17 Adhari Prajakta
15 IMS Group Mumbai 2017 1/6/17 - 30/6/17 Bhingardev Sandesh
16 Parksons Packaging 2017 5/6/17 - 24/6/17 Khole Gopinath
17 Parksons Packaging 2017 5/6/17 - 24/6/17 Lolge Nitin
18 Parksons Packaging 2017 5/6/17 - 24/6/17 Shinde Dnyaneshwar
19 Repro India Ltd 2017 8/6/17 - 8/7/17 Chaure Machindra
20 Lokprakashan 2017 1/6/17 - 30/6/17 SonpethkarAdvait
21 Shivani Printers 2017 15/6/17 - 4/7/17 Rabara Meet
22 Balwant Art , Nashik 2017 10/6/17 - 30/6/17 MestrySampada
23 Akruti 2017 1/6/17 - 15/7/17 Kendre Rutuja
24 Shakti Printers 2017 1/6/17 - 30/6/17 Thombare Pratap
25 Jivheshwar Printers 2017 1/6/17 - 30/6/17 Tathe Akhil
26 Lokprakashan 2017 1/6/17 - 30/6/17 Bhavsar Sumit
27 Akruti 2017 1/6/17 - 15/7/17 Lahange Kavita
28 Akruti 2017 1/6/17 - 15/7/17 Sutar Yashoda
29 Akruti 2017 1/6/17 - 15/7/17 Shinde Disha
30 Times Of India 2017 1/12/16 - 30/12/16 Atul Watmode
31 Times Of India 2017 1/12/16 - 30/12/16 Sandesh Bhingardev
32 Times Of India 2017 1/12/16 - 30/12/16 Mayur Supe
33 Times of India 2017 1/12/16 - 30/12/16 Ganesh Jondhale
34 Repro India Ltd. 2017 1/12/16 - 30/12/16 Nikita Lakade
35 Repro India Ltd. 2017 1/12/16 - 30/12/16 Barkul Aishwarya
36 Repro India Ltd. 2017 1/12/16 - 30/12/16 Kiran Shingade
37 Parksons Packaging Ltd. 2017 6/12/16 - 23/12/16 Dyanand Rathod
38 Parksons Packaging Ltd. 2017 6/12/16 - 23/12/16 Shubhangi Darpe
39 Parksons Packaging Ltd. 2017 6/12/16 - 23/12/16 Prajakta Adhari
40 Parksons Packaging Ltd. 2017 6/12/16 - 23/12/16 Rakesh Ware
Total: 40
2015- 16 1 C-MET, Pune 2016 1/6/16 - 30/6/16 Chaudhari Shweta
2 C-MET, Pune 2016 1/6/16 - 30/6/16 Inkane Gargi
3 C-MET, Pune 2016 1/6/16 - 30/6/16 Kulkarni Neha
4 Cosmo Films, Aurangabad 2016 1/6/16 - 30/6/16 Chavan Bharat
5 Cosmo Films, Aurangabad 2016 1/6/16 - 30/6/16 Akshay Shinde
6 Pratima Offset 2016 2 weeks Ganesh Bhoite
7 Pratima Offset 2016 2 weeks Pallavi Pawar
8 Pratima Offset 2016 2 weeks Akhade Ashutosh
9 Pratima Offset 2016 2 weeks Anagha Diwale
10 Sakal Press 2016 1/6/16 - 30/6/16 Shahrukh Attar
11 Sakal Press 2016 1/6/16 - 30/6/16 Tushar Harihar
12 Akruti Printers 2016 1/6/16 - 30/6/16 Patwardhan Arjun
13 Akruti Printers 2016 1/6/16 - 30/6/16 Aruna Kokare
14 Akruti Printers 2016 1/6/16 - 30/6/16 Nitin Sanap
15 Akruti Printers 2016 1/6/16 - 30/6/16 Rajaram Shinde
16 Akruti Printers 2016 1/6/16 - 30/6/16 Suyash Markad
17 Akruti Printers 2016 1/6/16 - 30/6/16 Shubham Jagtap
18 Huber India 2016 13/6/16 - 27/6/16 Chalak Govind
19 Huber India 2016 13/6/16 - 27/6/16 Suruse Sachin
20 Huber India 2016 13/6/16 - 27/6/16 Kathawade Sachin
21 Huber India 2016 13/6/16 - 27/6/16 Lomte Amol
22 Repro India 2016 1/6/16 - 2/7/16 Kashid Vishal
23 Repro India 2016 1/6/16 - 2/7/16 Paulbuddhe Sagar
24 Repro India 2016 1/6/16 - 2/7/16 Rajurkar Akash
25 Repro India 2016 1/6/16 - 2/7/16 Vajurkar Kishor
26 Repro India 2016 1/6/16 - 2/7/16 Linge Ajay
27 Repro India 2016 1/6/16 - 2/7/16 Puro Manasi
28 Repro India 2016 1/6/16 - 2/7/16 Gitte Anuja
29 Repro India 2016 1/6/16 - 2/7/16 Masalkar Shivani
30 PRS Permacel 2016 1/6/16 - 2/7/16 Gaikwad Pritesh
31 Pratiroop Mudran 2016 1/6/16 - 30/6/16 Suryawanshi Prashant
32 Pratiroop Mudran 2016 1/6/16 - 30/6/16 Deshmukh Nikhil
33 Sungraphic 2016 16/6/16 - 2/7/17 Ahirrao Ankit
34 Burger India 2016 1/6/16 - 30/6/16 Yawatkar Shubham
35 R-Pak Mumbai 2016 1/6/16 - 30/6/16 Ghadage Soham
36 R-Pak Mumbai 2016 1/6/16 - 30/6/16 Kunal Gosawi
37 Hi-tech Plast Khandala 2016 1/6/16 - 30/6/16 More Sujit
38 Hi-tech Plast Khandala 2016 1/6/16 - 30/6/16 Kanase Suraj
Total: 38
2014- 15 1 Essel Propack, Kalyan 2015 1 month Abhilash Neve
2 Essel Propack, 2015 1 month Chintan Kharade
3 Essel Propack, 2015 1 month Shivkumar Dhopte
4 Essel Propack, 2015 1 month Bharash K V
5 Essel Propack, 2015 1 month Amitkumar Singh
6 Essel Propack, 2015 1 month Abhinay Lakhmapure
7 Essel Propack, Kalyan 2015 1 month Mohit Chaudhari
8 Essel Propack, Kalyan 2015 1 month PratikBorude
9 Essel Propack, Kalyan 2015 1 month Tejash T N
10 Essel Propack Kalyan 2015 1 month Kishor Kadam
11 Repro India, Mumbai 2015 1 month Aditya Kulthe
12 Repro India, Mumbai 2015 1 month Sacchitanand Zingade
13 Repro India, Mumbai 2015 1 month Akshay Baisane
14 Repro India, Mumbai 2015 1 month Manoj Pawar
15 Repro India, Mumbai 2015 1 month Gopal Kale
16 Tetrapak, Chakan 2015 15 days Abhishek Zalki
17 Tetrapak, Chakan 2015 15 days Shweta Bante
18 Vikram Printers, Pune 2015 3 weeks Suprasad Puranik
19 Vikram Printers, Pune 2015 3 weeks Shubham Khandale
20 Vikram Printers, Pune 2015 3 weeks Nitin Wagh
21 Vikram Printers, Pune 2015 3 weeks Shubham Marewar
22 Vikram Printers, Pune 2015 3 weeks Ashish Chauhan
23 Vikram Printers, Pune 2015 3 weeks Karan Gupta
24 Akruti, Pune 2015 3 weeks Swapnika Watkar
25 Akruti, Pune 2015 3 weeks G.S.V.S Padmaja
26 Akruti, Pune 2015 3 weeks Anagha Dharmadikari
27 Akruti , Pune 2015 3 weeks Pratik Patil
28 Akruti , Pune 2015 3 weeks Kajal Rajwal
29 Vaibhav Printers, Pune 2015 1 month Saniya Patil
30 Sneha Publishers, Kolhapur 2015 1 month Rakesh Tikare
31 Amol Printers, Pune 2015 15 days Tejas Tathe
32 Jay Ganesh Offset, Pune 1 month Saurabh Kulkarni
33 Jay Ganesh Offset, Pune 1 month Abhishek Zanwar
34 Saun Digital, Pune 1 month Sanket Lele
35 Saun Digital, Pune 1 month Tushar Kothawale
Total: 35

Technical Event By Department

Workshops
Sr. No. Title of the Workshop Duration Organizing Department No. of Participants Sponsored by
Faculty Student
1 Printera 03 days Printing 08 200 Industry
2 Role play 01 day Printing 08 54 COPE
3 Women Empowerment Week 3days Printing Engineering 08 50 COPE
4 National Level “Adhesives used in Print and Packaging” 4 days June 11-14, 2018 Printing Engineering 03 20 Late V.G. Joshi Trust and PVG’s COET
5 Syllabus Revision: BE Printing 2015 Pattern 1 day, March 10, 2018 Printing Engineering 20 -- SPPU
6 PrintEra 03 days Printing 08 200 Print Industries
7 Role of pigment and pigment dispersion in manufacturing of printing inks 1 day, October 8, 2016 Printing Engineering 04 65 COPE
8 Digital Workflow 1 day Printing Engineering 8 70 Circle of Printing Engineers
9 Printing Ink Manufacturing 1 day Printing Engineering 8 70 Circle of Printing Engineers
10 CTP Technology 1day Printing Engineering 8 65 Circle of Printing Engineers
11 Corel Draw 2 days, March 4-5, 2014 Printing Engineering 03 60 COPE
12 Print Design & Logo Design’ 5 days, August 2014 Printing Engineering 04 65 Trimitiya and COPE
13 Half Day workshop on ‘Pigment Structure and Pigment Properties’ by Mr. M. D. Mettelloo, GM Pigment Technical services, Sudarshan   Chemical Industries Ltd Half day 28 Feb, 2017 Printing Engineering 05 75 PVG’s COET
14 Full day workshop on 'Role of Pigments Pigment Dispersion in manufacturing of Printing inks' By Mr. Kausik Purakayastha, General Manager, Hi-Tech Inks, Pvt. Ltd. 1 day Oct. 8, 2016 Printing Engineering 05 83 PVG’s COET
15 Half day workshop on ‘Chemical Additive used in printing inks’ by Mr. Adesh B. Malkar, Technical service Manager, BYK Asia Pacific Pvt. Ltd. 1st April 2016 Printing Engineering 05 75 PVG’s COET
16 Workshop on COLOR on 2013 at PVG’s COET, Pune 15th and 16th January, 2013 Printing Engineering 08 - COPE
17 Workshop on Corel Draw by Anand Dixit 02 December 2013 Printing Engineering 03 70 PVGCOET
18 Industry- Alumni Advisory meeting 01 Day July 2014 Printing 10 - PVGCOET
19 Syllabus revision workshop 01 Day June 2013 Printing 15 - PVGCOET
Faculty Development Programs
S. No. Title of FDP Duration Organizing Department No. of Participants Sponsored by
Faculty Student
1 Patent 2 Days Department of Printing 9 0 COPE
Training Program
Sr. No. Title of the Program Duration Organizing Department No. of Participants Sponsored by
Faculty Student
1 High Resolution Screen Printing 3 Days 10 to 12 Dec. 2018 Printing Engineering 01 - Screenset, Pune
2 Inkscape software 2 days July 2016 Printing Engineering 03 10 V- Labs, IIT, Powai
3 Training workshop on GWD 01 day March 2016 Printing 05 30 PVGCOET

Faculty as Reviewer/Judges

Sr. No. Name of the Faculty Event Remark
1. Dr. Akshay V. Joshi Journal of Coatings Technology and Research, Springer, Reviewer (Year 2019)
2. Dr. Akshay V. Joshi Journal of Coatings Technology and Research, Springer, Reviewer (Year 2018)
3 Dr. Akshay V. Joshi BioResources Reviewer (Year 2016)
4. Dr. Akshay V. Joshi Journal of Coatings Technology and Research, Springer, Reviewer (Year 2016)
5. Dr. Akshay V. Joshi Journal of Coatings Technology and Research, Springer, Reviewer (Year 2015)

Result Analysis

Year Overall Passing %
SE TE BE
2019-20 81.48 86.57 100
2018-19 65.67 83 64.79
2017-18 58.90 65.33 92.5
2016-17 47.94 80 95.94
2015-16 65.21 78.37 98.79
2014-15 66.55 92.59 98.73
2013-14 100 96.29 98.48
2012-13 48.78 85.24 98.55
Our Pride Toppers for Academic Year 2019-20
Rank S.E. Printing T.E. Printing B.E. Printing
1 Gargi Shah (9.8 SGPA) Kalkhaire Yash Sanjay (9.39 SGPA) Gayatri Jitendra Anaspure (9.82 SGPA)
2 Pranali Kataria (9.6 SGPA) Dhembare Sanket Ajay
Hange  Sharad Mahadev
Talekar Manish Ashok
Tapase Suyash Santosh
(9.22 SGPA)
Rutuja Prashant Mahindrakar
(9.5 SGPA)
3 Omkar Kokatay (9.24 SGPA) Mahajan Harshvardhan Gulabrao (9.04 SGPA) Jay Kale (9.14 SGPA)
Our Pride Toppers for Academic Year 2018-19
Rank S.E. Printing T.E. Printing B.E. Printing
1 Sharad Hange (8.6 SGPA) Mahima Yadav (9.61 SGPA) Ajay Jagtap (9.45 SGPA)
2 Manish Talekar (8.4 SGPA) Gayatri Anaspure (9.39 SGPA) Meet Rabra (9.27 SGPA)
3 Krishnaraj Mokashi (8.4 SGPA) Pranita Chhagan Bhagat (9.17 SGPA) Radhika Sathe (9.09 SGPA)
Our Pride Toppers for Academic Year 2017-18
Rank S.E. Printing T.E. Printing B.E. Printing
1 Kale Jay (9.3 SGPA) Rabara Meet (9.5 SGPA) Avinash Ghumre (76.13%)
2 Anaspure Gayatri (9.14 SGPA) Abhang Ruchi Mahendra (9.3 SGPA) Shubhangi Darphe (73.73%)
3 Mahima Yadav (8.86 SGPA) Sathe Radhika Sahebrao (9.22 SGPA) Machhindra Chaure (72.6%)
Our Pride Toppers for Academic Year 2016-17
Rank S.E. Printing T.E. Printing B.E. Printing
1 Meet Rabara (9.32 SGPA) Avinash Ghumre (71.46%) Shivani Masalkar (76.07%)
2 Pratap Thombare (8.92) Nikita Lakade (70.67%) Govind Chalak (75.6%)
3 Yogesh Suryawanshi (8.80) Machindra Chaure (70.60%) Arun Vaidya (74%)
Our Pride Toppers for Academic Year 2015-16
Rank S.E. Printing T.E. Printing B.E. Printing
1 Priyanka Chakote (68.87%) Bansode Nandkumar (74.8%) Varsha Amte (75.27%)
2 Anagha Chitade (67.20%) Govind Chalak (74.07%) G.S.V.S. Padmaja (75.2%)
3 Niranjan Naikwadi (67.06%) Arjun Patwardhan (72.67%) K.   V. Bharath (71.8 %)
Our Pride Toppers for Academic Year 2014-15
Rank S.E. Printing T.E. Printing B.E. Printing
1 Shivani Masalkar (73.27%) G. S. V. S. Padmaja (75.67%) Harsha A. (76.53%)
2 Govind Chalak (73.27%) Varsha Amte (74.46 %) Manali Kulkarni (75.6 %)
3 Nikita Bhosle (70.63%) Amitkumar Singh (72.93%) Ajinkya Lanke (74.07%)

Alumni Information

Printing Engineering Department has a strong bond with Alumni.  Alumni contribute to the department by various ways. Few are mentioned as below
  • Guiding students through expert lectures
  • Providing training and internship to students
  • Donating books
  • Sponsoring student projects
  • Providing support for Industry visits
  • Contribution for curriculum development
Details of few Alumni excelling in various fields
Name of the Alumnus : Suhas Kulkarni
BE Printing Engineering : Year of Passing 1993 PVG’s COET, Pune
Academic Qualifications: BE Printing, AGMP, IIM Ahmedabad
Brief information about the current position/designation: Business Director, Asia Pacific Packaging Segment Market Leader
Organization : Solenis Chemicals
Significant Contributions : Delivering expert lectures in the field of flexo plates, mentoring students and campus placement
Name of the Alumnus : Dr. Rajendra Kumar Anayath
BE Printing Engineering – Year of Passing 1994 PVG’s COET, Pune
Academic Qualifications: BE Printing, M.Tech, Ph.D. Printing
Brief information about the current position/designation : Vice Chancellor Organization :  DCRUST, Murthal, Uttar Pradesh
Significant Contributions : Delivering expert lectures, as external examiner for ME Project Viva-voce
Name of the Alumnus : Mr. Sanjeev Popli
BE Printing Engineering : Year of Passing 1989 PVG’s COET, Pune
Academic Qualifications: BE Printing
Brief information about the current position/designation: Director
Organization :  Popli Graphics
Significant Contributions : Sponsoring consumables, supporting department in networking with industry for placements, technical support and guest lectures
Name of the Alumnus : Nitin Wani
BE Printing Engineering : Year of Passing 1989 PVG’s COET, Pune
Academic Qualifications: BE Printing
Brief information about the current position/designation: Consultant
Organization:  Smart Solutions
Significant Contributions: Examiner for UG examinations, curriculum development

Printing Engineering Department has following Departmental Libraries

Department Library
  • Reference books
  • Proceedings & Journals
  • Handbooks & manuals
E-Library